The largest machine bay (5 Bay, pictured above) comprises of a machine bed which covers half of the entire bay (34.5 M x 14.7M)
CNC Ram borers surround this huge bedplate enabling very large work pieces to be machined, their weight only governed by the weight limits of the overhead cranes.
220 tonne max (Single Crane)
330 tonne (Linked Cranes) - Headroom: 12.8 metres
Machining Facilities: -
Machine type | Number of machines | Capacity (max) |
Plano milling | 3 | 5.1m X 4.5m X 13.2m |
Gantry Mill | 1 | 4.8m X 2.2m X 14.0m |
Ram Borer | 8 | 5.0m X 1.5m X 14.0m |
Horizontal Borers | 7 | 2.0m X 1.0m X 6.0m |
Vertical Borers | 6 | 12.9m swing X 3.9m ht |
Large centre lathes | 6 | 2.0m dia X 14m lg |
You can click on the following links to display our Machining & Fabrication capacities;
The huge machining capability of DavyMarkham allows the machining of single piece castings in excess of 350 Tonne.
Left:The Waldrich Coburg Plano milling machine is seen here finish machining a mill housing for the VAI / Angang
4.3 metre wide Plate Mill in China. This housing has a finished weight of 290 Tonnes
Right: an aerial view of one half of DavyMarkham's heavy machining Bay.
The photograph left shows rolling mill housings and housing posts being machined on the huge surface plate which is 34.5 metres long by 14.7 metres wide.
This unique facility enables very large castings and fabrications to be machined with minimal set-up time.
General Engineering and Fabrication
